What the Error Code Means
Error code OP generally means the refrigerator detected an open-door or control alert condition.
It points to a door or control status rather than a confirmed single failure.
Common Symptoms You May Notice
- The display shows OP and the unit may beep.
- A door may not be fully closed.
- Cooling may continue but the alert remains on the display.
Most Common Causes (From Least to Most Serious)
- Door left open or not sealing fully: If a door is slightly ajar, the refrigerator reports an open-door alert.
- Temporary control panel alert: Some models show OP after a power interruption or door alarm.
- Alert status is outside the expected range: In some cases the refrigerator reports a door or control alert to protect normal operation.
Safe Things You Can Check Yourself
- Make sure the doors are fully closed and the gaskets are clean.
- Press any key or reset the alert to clear the display.
- Power cycle the refrigerator: unplug it for one minute, then plug it back in.
If at any point this feels unsafe or unclear, stop and contact a professional.
When to Stop and Call for Service
- The OP code returns after door checks and a reset.
- Cooling does not return to normal or doors will not seal.
- You notice burning smells, sparking, or repeated shutdowns.
Typical Repair Cost Range
$0-$200 is typical for diagnosis if door or alert issues persist, depending on the cause and parts involved.
Costs vary by region, model, and provider. Request an estimate before approving any repair.